• capable of climbing and creeping 
• axial feed per feed ca. 100 mm 
• suitable for pipes of DN 80 - 150 (optional supplementary parts for diameters up to DN 250)
• suitable for use in bends of up to 67° in pipes of DN 100 upwards (without folds and similar obstructions)
• suitable for use in inspection shafts and cleaning openings
• 30 m media connection cables
• connecting parts for insertion using pipe eel / fiberglas (pipe eel / fiber glas is not in standard scope of delivery) or for pulling in by rope
• minimum outer diameter 70 mm
• swivel movement of head approx. 110 mm (135°) with limit stop
• turning movement of head ± 200° with limit stop
• powerful pneumatic motor with approx. 0.6 kW at approx. 10,000 min-1 idling speed
• integrated color camera 
• camera lens made of scratch and shock-proof sapphire
• camera lens cleaning using air jets
• two adjustable halogen headlamps 2 x 10 Watt
• compressed nitrogen throughout the device to permit manual monitoring of tightness
• transporting rack with wheels for hose and cutter
• electrical slip ring lead-through
• pneumatic rotational seal 
• control unit integrated in the rackwith TFT-Monitor and sun protection
• Continuously adjustable light control 
• Dynamic joystick control of turning and swivelling 
• Control-LED for diagnostic error
• Analogue video output
• combinable with universal control panal 
• air drying unit with dirt filter and integrated water separator for dressing of compressed air for cleaning camera lens during cutting
• compressed air requirement 1 m³/min max. 10 bar lead-in pressure; without oil (<0,1mg/m³), filtered (particle < 1 Micron) and with max. temp of 40°C
• voltage 220V, 6A, 50 Hz (110 V, 60 Hz) , voltage precision +/- 1% between idling and full power
• dimensions L x W x H = 660 x 550 x 800 mm, weight with rack approx. 45 kg